Manual Copper Propress Tool

IWISS develops a manual pressing tool work with the ProPress system for those who don't have too much work with copper tubings and want to save the budget.

Can you use ProPress on copper?

ProPress® and ProPress XL (Copper) are safe, reliable and economical copper pipe installation systems that use modern cold press connection technology. Viega® ProPress fittings are for use with type K, L and M hard copper tubing from ½" to 4" and soft copper tubing in ½" to 1¼" diameters.

Is ProPress better than solder?

Unlike soldering, ProPress systems do not need an open flame to be completed. This creates a safer work environment and by not requiring a hot work permit, saves time. Another advantage over soldering, ProPress fittings can be installed without having to drain and dry the system beforehand.

Are copper press fittings reliable?

Copper press fitting is a flameless alternative to soldering copper pipe connections. In this system, a hydraulic tool is used to press specially designed connectors to join traditional pipes. These connectors house a sealing element that, when pressed, creates an even and reliable connection.

What is the life expectancy of ProPress fittings?

All depends on the water. Water treatment is a good plan regardless. It should be more than 25 years.

Can you ProPress over a solder joint?

Essentially the distance is a multiple of the size of the tube diameter. Can you solder next to ProPress fittings? Yes. When soldering next to ProPress fittings, the installer must remain at least three tube diameters away from the connection to prevent damage to the sealing element.

Do ProPress fittings leak?

In general, Viega Propress fittings only leak due to one of three reasons; the fitting was never pressed, the copper tubing was not properly inserted or the pressing jaws were not properly aligned. If the fitting was never pressed, confirm that the tubing is properly installed and proceed with pressing.

Can you ProPress copper to PEX?

ProPress copper to PEX fittings are needed when installers are adding new supply lines to a home or business. Traditionally, making these connections involves the use of sweat adapters.

Can ProPress go underground?

It's one of the most common questions we get: can MegaPress, ProPress and other fittings be used underground? The answer is yes.

Do plumbers use ProPress?

What Is ProPress? ProPress is a system for connecting copper pipes. A plumber uses a ProPress to fit a pipe joint and itself is a trading name used by Manufacturer Viega, but there are also other companies manufacturing the ProPress type fittings.

Are ProPress fittings permanent?

connection during pressure testing when water flows past the sealing element. ProPress tool is used to press the fitting, making a permanent leak-proof connection.

How far apart do ProPress fittings need to be?

Tubing Diameter	Minimum Distance (inches)	Minimum Distance (mm)
2 in	3/4 in	20 mm
2-1/2 in	5/8 in	15 mm
3 in	5/8 in	15 mm
4 in	5/8 in	15 mm

What is the green dot on a ProPress fitting?

A green dot on a Viega ProPress, MegaPress fitting indicates Smart Connect technology with an EPDM sealing element. A yellow dot on a Viega MegaPressG fitting indicates Smart Connect technology with an HNBR sealing element.

How much pressure can ProPress fittings handle?

Engineered for a variety of gas applications, including natural gas, LP gas and fuel oil, Viega ProPressG has been tested to withstand a maximum pressure of 125 psi and an ambient temperature range of -40 degrees F to 180 degrees F.

Can you ProPress steam fittings?

ProPress and ProPress XL (EPDM) is approved for use in Low Pressure Steam Applications, max 15 psig / max 248 deg F. MegaPress (EPDM) is approved for use in Low Pressure Steam Applications, max 15 psig / max 248 deg F.

Do professional plumbers use SharkBite?

Most professional plumbers believe that SharkBite fittings and other kinds of push-fit fittings should only be used as an emergency, temporary fix, and not for any enclosed or permanent plumbing system.

Are press fittings worth it?

Press fittings save time and money. Plus, significantly less training is required to operate the press tool compared to welding, brazing or soldering. This makes press fittings an excellent labor saving solution, especially when installing large-scale pipe systems.

Can Propress be used on refrigeration?

Machining single ring propress for refrigeration lines is the other way to manufacture the Miracle single ring. You can also call it turning single ring propress for refrigeration lines.

Can you use Propress on propane?

Propress G press fittings are manufactured with a high quality HNBR sealing element installed at the factory. This sealing element is used mainly for applications of natural, propane, mixed, and manufactured gases, and can be used in fuel oil systems.

Can Propress be used on gas?

Pro-press has copper GAS fittings. These contain Yellow O-rings for use with gas and oil!